Material fit
Crates, drums, buckets, caps, pipe offcuts and injection-molded scrap in PP and HDPE.
A complete crushing, washing, separation and drying line for rigid PP and PE — configured around your contamination level, hourly capacity and required flake quality.
Rigid PP and PE arrive with soil, labels, caps, metal and residual product. Each stage removes one class of contamination so the output can go straight to granulation.
Crates, drums, buckets, caps, pipe offcuts and injection-molded scrap in PP and HDPE.
Soil and sand, paper labels, product residue, cap and closure fractions, ferrous metal.
Washed flakes with residual moisture driven down before drying; final moisture depends on material and configuration.
Published configurations from the LVKE washing-line series. Final sizing is confirmed after a material study.
| Model | Capacity (kg/h) | Water use (t/h) | Total power (kW) | Outlet moisture | Typical feed |
|---|---|---|---|---|---|
| WL-500 | 500-800 | 3-5 | 80-120 | ≤2% | PET bottles / household plastics |
| WL-1000 | 1,000-1,500 | 5-8 | 120-180 | ≤2% | PET / HDPE / PP |
| WL-2000 | 2,000-3,000 | 8-12 | 180-250 | ≤2% | Mixed rigid and film plastics |
| WL-5000 | 3,000-5,000 | 12-20 | 250-300 | ≤2% | Large recovery centres |
Figures are the values published for the LVKE washing-line series; final moisture and throughput depend on material form, contamination and configuration.
Six stages, each tuned to the feedstock rather than fixed at a catalogue setting.
Baled or loose rigid scrap is metered into the line.
PS-series crusher reduces material to a size the washer can handle.
High-speed friction rotor strips soil, labels and residue.
Density separation removes sinks such as metal, stone and heavy plastics.
Mechanical dewatering removes the bulk of surface water.
Thermal drying brings flakes to the moisture your granulator accepts.
Each unit is also available as a standalone machine, with the same published specifications.
Single shaft shredder PS-series crusher Friction washer Dewatering machine
The published washing-line series spans 500-800 kg/h on WL-500 up to 3,000-5,000 kg/h on WL-5000. Your figure is confirmed after a material study.
Between 3 and 20 t/h depending on model. The line is designed with a closed-loop water system including settling, filtration and water treatment.
Yes. Rigid PP and HDPE share the same process route; the separation and drying settings are adjusted to the mix.
The published outlet moisture for the series is 2% or lower; the exact result depends on material form and the drying stage selected.