Material fit
ABS, HIPS/PS, PP, PA and PC housings, inner liners, drawers and structural parts.
WEEE housings are a mixed engineering-plastic stream with screws, inserts and foam attached. The line removes metal first, then crushes and washes by polymer group.
Fridges, washing machines, air conditioners and small appliances arrive as complete housings. Metal removal before crushing protects the blades and keeps the plastic fraction clean.
ABS, HIPS/PS, PP, PA and PC housings, inner liners, drawers and structural parts.
Screws, metal inserts, foam, rubber seals, dust and printed labels.
Washed flakes separated by polymer group, ready for granulation or compounding.
Published LVKE washing-line series values. Metal removal is added ahead of crushing as standard on appliance projects.
| Model | Capacity (kg/h) | Water use (t/h) | Total power (kW) | Outlet moisture | Typical feed |
|---|---|---|---|---|---|
| WL-500 | 500-800 | 3-5 | 80-120 | ≤2% | Small WEEE dismantling |
| WL-1000 | 1,000-1,500 | 5-8 | 120-180 | ≤2% | Regional e-waste lines |
| WL-2000 | 2,000-3,000 | 8-12 | 180-250 | ≤2% | Appliance recycling plants |
| WL-5000 | 3,000-5,000 | 12-20 | 250-300 | ≤2% | Large WEEE processing |
Polymer separation scope (density, electrostatic or optical) depends on the housing mix and is confirmed after a material study.
Metal first, size second, separation last.
Housings are stripped of cables and large metal parts.
Ferrous and non-ferrous fractions are taken out before crushing.
PS-series crusher with a screen sized to your target flake.
Friction washing removes dust, foam residue and labels.
Floating and sinking polymer groups are split.
Flakes dried before granulation or compounding.
Shredding, crushing and washing are selected by housing size and polymer mix.
Yes — but separation scope has to be designed in. Density separation splits some groups; electrostatic or optical sorting is added where the mix demands it.
Screws and inserts damage blades and contaminate the plastic fraction, so metal removal sits ahead of the crusher.
Not always. Clean industrial scrap can go straight to granulation; post-consumer housings normally need washing to remove dust and foam residue.
The PS-series crusher uses interchangeable screens to set flake size for the downstream granulator.